2013年9月18日星期三

Le plus récent matériel de formation Hitachi HH0-260

Vous serez impressionné par le service après vendre de Pass4Test, le service en ligne 24h et la mise à jour après vendre sont gratuit pour vous pendant un an, et aussi vous allez recevoir les informations plus nouvelles à propos de test Certification IT. Vous aurez un résultat imaginaire en coûtant un peu d'argent. D'ailleurs, vous pouvez économier beaucoup de temps et d'efforts avec l'aide de Pass4Test. C'est vraiment un bon marché de choisir le Pass4Test comme le guide de formation.

Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A Hitachi HH0-260 comme votre guide d'étude.

Nous assurons seulement le succès de test certification, mais encore la mise à jour est gratuite pour vous. Si vous ne pouvez pas passer le test, votre argent sera 100% rendu. Toutefois, cette possibilité n'est presque pas de se produire. Vous pouvez tout d'abord télécharger le démo gratuit pour prendre un essai.

Pass4Test peut offrir la facilité aux candidats qui préparent le test Hitachi HH0-260. Nombreux de candidats choisissent le Pass4Test à préparer le test et réussir finalement à la première fois. Les experts de Pass4Test sont expérimentés et spécialistes. Ils profitent leurs expériences riches et connaissances professionnelles à rechercher la Q&A Hitachi HH0-260 selon le résumé de test réel Hitachi HH0-260. Vous pouvez réussir le test à la première fois sans aucune doute.

Code d'Examen: HH0-260
Nom d'Examen: Hitachi (Hitachi Data Systems Certified Implementer File Services)
Questions et réponses: 120 Q&As

On doit faire un bon choix pour passer le test Hitachi HH0-260. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification Hitachi HH0-260 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.

HH0-260 Démo gratuit à télécharger: http://www.pass4test.fr/HH0-260.html

NO.1 You are establishing a replication link between two HCP platforms. You set the performance
level as
part of the configuration options. What does this setting indicate?
A. the server priority rate for nodes associated with that replication link
B. the amount of bandwidth made available for replication on the link
C. the number of concurrent replication operations that can occur on each node
D. the data transfer rate associated with each tenant namespace
Answer: C

Hitachi   certification HH0-260   HH0-260 examen

NO.2 Which three tenant management console permissions does the security role have on a HCP?
(Choose three.)
A. View namespace access protocol configurations.
B. View tenant log messages about security events.
C. View tenant overview.
D. Monitor replication.
E. Modify tenant management console security settings (HCP tenants only).
Answer: B,C,E

Hitachi examen   HH0-260   certification HH0-260   HH0-260 examen

NO.3 Your customer wants to use IP addresses which conflict with the default HCP network
settings. As a result you need to change the back-end IP addresses for each HCP node.
Which HCP network settings should you change?
A. the back-end gateway router IP address
B. the back-end subnet mask
C. the first three octets of the back-end IP addresses
D. the fourth octet of the back-end IP addresses
Answer: C

Hitachi   HH0-260   HH0-260   HH0-260 examen   HH0-260

NO.4 A customer will be removing old Windows file servers and moving existing data to the default
namespace on their new HCP 500.
Which protocol is recommended to accomplish the move?
A. CIFS
B. HTTP
C. REST
D. NFS
Answer: A

Hitachi   certification HH0-260   HH0-260

NO.5 A storage administrator on a customer site is performing a diagnosis of the HCP system by
reviewing the system event logs.
Which two are recorded in the system events log? (Choose two.)
A. logical volume failures
B. namespace list
C. users deleted
D. roles assigned
Answer: A,C

Hitachi   HH0-260   certification HH0-260

NO.6 Which OS LUN size do all HCP 300 configurations use?
A. 20 GB
B. 30 GB
C. 50 GB
D. 400 GB
Answer: B

Hitachi   HH0-260   certification HH0-260

NO.7 Which three statements are true about encryption on a HCP? (Choose three.)
A. Once enabled, encryption cannot be disabled.
B. The encryption key is accessible through the system management console.
C. Encryption can only be enabled at the time of installation.
D. The encryption key must be written down and given to the customer.
E. The encryption key is displayed several times during the installation process.
Answer: A,C,D

certification Hitachi   HH0-260 examen   HH0-260

NO.8 Which two factors should you consider prior to performing an upgrade? (Choose two.)
A. the physical location of the highest numbered search node
B. the physical location of the highest numbered storage node
C. the install user password
D. the service user password
Answer: B,C

Hitachi examen   certification HH0-260   HH0-260

NO.9 You are adding two more volumes into each node of a HCP 500 DL. The storage administrator
informs you that all SAN volumes have been created, zoned and presented to the HCP.
Which LUN number presented to the HCP will cause a problem.?
A. 5
B. 128
C. 130
D. 131
Answer: B

Hitachi   certification HH0-260   HH0-260   certification HH0-260   HH0-260 examen

NO.10 A customer has an existing HCP 500 consisting of four storages nodes. They have just
purchased an additional HCP 500 and you are informed that you will be performing the replication
setup.
What is the requirement prior to setting up replication?
A. trusted replication server certificates
B. replication link
C. outbound link name
D. inbound link name
Answer: A

Hitachi   HH0-260   HH0-260   HH0-260

NO.11 Which node architecture is used by the HCP 500?
A. SAIN
B. PAIN
C. RAIN
D. NAIN
Answer: A

Hitachi examen   HH0-260   certification HH0-260

NO.12 In a SAIN based HCP solution, which RAID protection scheme is considered standard use with
an
AMS 2000 system?
A. RAID 5 (6+1)
B. RAID 6 (5+2)
C. RAID 6 (6+2)
D. RAID 5 (7+1)
Answer: B

Hitachi   HH0-260 examen   HH0-260

NO.13 Which three replication types are supported by HCP? (Choose three.)
A. chain
B. many-to-one
C. one-to-many
D. bidirectional
E. link level
Answer: A,B,D

Hitachi   HH0-260   HH0-260   certification HH0-260   HH0-260

NO.14 You are configuring a HCP 500 solution with AMS 2100 storage. You choose to configure the
storage devices first in the list of tasks associated with this process.
What is the reason for sequencing the tasks in this way?
A. The HCP software must first be installed on the AMS 2100 for access.
B. Formatting the storage containers will take a considerable amount of time.
C. You must have the data LUNs established before you can install the core OS.
D. The HCP command LUN must be established on the AMS 2100.
Answer: B

Hitachi examen   HH0-260 examen   HH0-260   HH0-260 examen   HH0-260 examen

NO.15 A customer expects to store 4 billion objects with an initial HCP configuration. Search is not
required at this time.
Which configuration will meet the requirements for this customer?
A. HCP 300 with ten storage nodes
B. HCP 500 with two storage nodes
C. HCP 300 with four storage nodes
D. HCP 500 with eight storage nodes
Answer: A

certification Hitachi   HH0-260 examen   HH0-260

NO.16 Which two statements are true about the HCP back-end network? (Choose two.)
A. All nodes in a HCP system must be on the same system-specific private back-end IP subnet.
B. All nodes in a HCP system must be split across a dual-redundant private back-end IP subnet.
C. The fourth octet of the back-end IP addresses should not be changed after it has been
configured.
D. The fourth octet of the back-end IP addresses must match the fourth octets used in the front-end
IP
addresses.
Answer: A,C

Hitachi   HH0-260   HH0-260   HH0-260

NO.17 What is the required zone configuration of a SAN fabric to support a HCP 500?
A. one global zone containing all HCP nodes World Wide Port Names (WWPN) of the HBA ports and
the
storage ports
B. one zone per HCP node containing two members: World Wide Port Names (WWPN) of the HBA
port
and the storage port
C. two mirrored zones; one containing the even numbered World Wide Port Names (WWPN) of the
HBA
port and the storage port; the other containing odd numbered ports
D. two zones: one zone containing all HCP nodes World Wide Port Names (WWPN) of the HBA ports
and
the second zone containing all the storage ports
Answer: B

Hitachi   HH0-260   certification HH0-260   HH0-260   HH0-260

NO.18 A customer wants to ingest around 1 million files residing in several Windows 2003 and
RedHat Linux servers into three newly created HCP tenants and namespaces.
Which two procedures do you recommend? (Choose two.)
A. Use copy, move and create directory functions available from HCP client tools for Linux.
B. Use copy, move and create directory functions available from Linux server.
C. Use copy, move and create directory functions available from HCP client tools for Windows.
D. Use copy, move and create directory functions available from Windows server.
Answer: A,C

Hitachi   certification HH0-260   certification HH0-260   certification HH0-260   HH0-260 examen

NO.19 You have performed an upgrade on a customer's HCP. You complete the upgrade and verify
that all the nodes are online and then give the system back to the customer. A few minutes later,
the customer
complains that they can read existing content but they cannot create new content on the HCP.
Which step was missed?
A. The install user password was changed.
B. The upgrade was not committed.
C. The rollback was not performed.
D. The system management console is disabled.
Answer: B

certification Hitachi   HH0-260 examen   HH0-260   HH0-260   certification HH0-260

NO.20 How should the RAID group(s) and logical volume(s) be configured on a HCP 300 node?
A. three RAID groups each with three logical volumes
B. three RAID groups each with a single logical volume
C. a single RAID group with a single logical volume
D. a single RAID group with three logical volumes
Answer: D

Hitachi   certification HH0-260   HH0-260

Le produit de Pass4Test que vous choisissez vous met le pied sur la première marche du pic de l'Industrie IT, et vous serez plus proche de votre rêve. Les matériaux offerts par Pass4Test peut non seulement vous aider à réussir le test Hitachi HH0-260, mais encore vous aider à se renforcer les connaissances professionnelles. Le service de la mise à jour pendant un an est aussi gratuit pour vous.

没有评论:

发表评论