Guide de formation plus récente de BICSI RCDD

Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A BICSI RCDD est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.

Après une longue attente, les documentations de test BICSI RCDD qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test BICSI RCDD à la première fois.

Maintenant, beaucoup de professionnels IT prennent un même point de vue que le test BICSI RCDD est le tremplin à surmonter la pointe de l'Industrie IT. Beaucoup de professionnels IT mettent les yeux au test Certification BICSI RCDD.

Pass4Test peut vous fournir un raccourci à passer le test BICSI RCDD: moins de temps et efforts dépensés. Vous trouverez les bonnes documentations de se former dans le site Pass4Test qui peut vous aider efficacement à réussir le test BICSI RCDD. Si vous voyez les documentations dans les autres sites, c'est pas difficile à trouver qu''elles sont venues de Pass4Test, parce que lesquelles dans Pass4Test sont le plus complété et la mise à jour plus vite.

Code d'Examen: RCDD
Nom d'Examen: BICSI (Registered Communications Distribution Designer )
Questions et réponses: 106 Q&As

RCDD Démo gratuit à télécharger: http://www.pass4test.fr/RCDD.html

NO.1 In buildings that will contain the telecommunications systems, NEC requirements
address the adequate electrical environment for reliable and error-free operation of
the installed equipment.
A. False
B. True
Answer: A

BICSI examen   RCDD   certification RCDD   RCDD examen

NO.2 ________is the total opposition (resistance, capacitance, and inductance) a circuit,
cable, or component offers to the flow of alternating current.
A unit of measure expressed in ohms.
Answer: Impedance

certification BICSI   RCDD   certification RCDD   RCDD

NO.3 Between the late 60's and until 1984, what was the service that was to help architects
and engineers better design and implement pathways and spaces in commercial
buildings for telephone communications?
A. BICS
B. AT&T
C. CREDFACS
D. GTE
E. BICSI
Answer: A

BICSI examen   RCDD   RCDD examen   certification RCDD   RCDD

NO.4 The CEC is revised every four years.
A. True
B. False
Answer: A

BICSI examen   RCDD   RCDD   RCDD   RCDD

NO.5 Which of the following should be used as a guideline for estimating space
requirements of optical fiber and coaxial cable cross-connections in a TR?
A. 3 sq. in. for each fiber pair to be patched or cross-connected.
B. 2 sq. in. for each fiber pair to be patched or cross-connected.
C. 4 sq. in. for each fiber pair to be patched or cross-connected.
D. 1 sq. in. for each fiber pair to be patched or cross-connected.
Answer: B

certification BICSI   RCDD   RCDD   RCDD

NO.6 Which of the following is the Standard for the Installation of Lightning Protection
Systems?
A. NFPA-780
B. NFPA-70
C. NFPA-72
D. NFPA-75
Answer: A

BICSI examen   RCDD   RCDD

NO.7 Distribution cable is that part of the loop that connects the customer location to the
customer feeder cable.
A. True
B. False
Answer: A

BICSI   RCDD   certification RCDD   RCDD examen

NO.8 A product is listed after it successfully completes a series of which of the following
test?
A. Mechanical
B. Regulatory codes
C. Electrical
D. Thermal
Answer: ACD

certification BICSI   RCDD examen   certification RCDD   RCDD   RCDD

NO.9 The inadvertent transposition of two conductors of separate pairs is called what?
A. Twisted pair
B. Transposed pairs
C. Reversed pair
D. Split pair
Answer: D

certification BICSI   RCDD examen   RCDD

NO.10 Which of the following is the international standard for premises cabling?
A. ISO/IEC 18010
B. ISO/IEC 11801
Answer: B

BICSI   certification RCDD   RCDD examen

NO.11 In an "underfloor duct system", the distribution ducts carry cables from the TR to
the feeder ducts.
A. False
B. True
Answer: A

certification BICSI   RCDD   RCDD   RCDD   RCDD examen

NO.12 In what year was the TIA formed?
A. 1985
B. 1965
C. 1958
D. 1956
Answer: A

BICSI examen   RCDD   certification RCDD   RCDD   RCDD examen   RCDD

NO.13 What is the standard floor space allocation used in an office environment for one
individual work area?
A. 100 square feet.
B. 50 square feet.
C. 150 square feet.
D. 75 square feet.
Answer: A

BICSI   RCDD   RCDD examen   certification RCDD   RCDD examen

NO.14 Which of the following is the standard for "Recommended Practice for Installation
Design and Installation of Valve Regulated Lead-Acid Storage Batteries for
Stationary Applications"?
A. ANSI/IEEE C62.41
B. ANSI/IEEE C62.45
C. ANSI/IEEE P1188-1996
D. ANSI/IEEE P1187-1996
Answer: D

certification BICSI   certification RCDD   RCDD examen   certification RCDD   RCDD examen

NO.15 The ability of a device, equipment, or system to perform without degradation in the
presence of an electromagnetic disturbance is called what?
A. Electromagnetic immunity.
B. Electromagnetic compatibility.
C. Electromagnetic induction.
D. Electromagnetic disturbance.
Answer: A

BICSI   RCDD   certification RCDD

NO.16 Which of the following is the Cable Modem (Cable-TV) Working Group?
A. IEEE 802.9
B. IEEE 802.11
C. IEEE 802.14
D. IEEE 802.3
Answer: C

BICSI examen   RCDD examen   RCDD   certification RCDD   certification RCDD

NO.17 NRZ is the acronym for which of the following?
A. Non-return to zero.
B. Nominal return zone.
C. Network registration zone.
D. Normal return zone.
Answer: A

BICSI examen   RCDD   RCDD

NO.18 ANSI/TIA/EIA-758 is the standard for which of the following?
A. Customer-Owned Outside Plant Telecommunications Cabling Standard.
B. Technical Specifications for 100 Ohm Screened Twisted Pair Cabling.
C. Propagation Delay and Delay Skew Specifications for 100-Ohm 4-Pair Cable.
D. Residential Telecommunications Cabling Standard.
Answer: A

BICSI examen   RCDD examen   RCDD examen   certification RCDD

NO.19 A "wye" is a power system in which only one point is grounded.
A. False
B. True
Answer: B

BICSI   RCDD examen   certification RCDD   RCDD   RCDD   RCDD examen

NO.20 For design purposes, which of the following would be the typical size range of a
4-pair 100 ohm UTP or ScTP (FTP) cable?
A. .50 in to .75 in
B. .14 in to .25 in
C. .31 in to .43 in
D. .11 in to .18 in
Answer: B

BICSI   certification RCDD   RCDD   RCDD examen

Avec l'aide du Pass4Test, vous allez passer le test de Certification BICSI RCDD plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de BICSI RCDD, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.