显示标签为“NS0-154”的博文。显示所有博文
显示标签为“NS0-154”的博文。显示所有博文

2013年11月29日星期五

Le plus récent matériel de formation examen Network Appliance NS0-154 de certification

Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A Network Appliance NS0-154. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test Network Appliance NS0-154 sans aucune doute.

Le temps est tellement précieux dans cette société que une bonn façon de se former avant le test Network Appliance NS0-154 est très important. Pass4Test fait tous efforts à assurer tous les candidats à réussir le test. Aussi, un an de mise à jour est gratuite pour vous. Si vous ne passez pas le test, votre argent sera tout rendu.

Selon les feedbacks offerts par les candidats, c'est facile à réussir le test Network Appliance NS0-154 avec l'aide de la Q&A de Pass4Test qui est recherché particulièrement pour le test Certification Network Appliance NS0-154. C'est une bonne preuve que notre produit est bien effective. Le produit de Pass4Test peut vous aider à renforcer les connaissances demandées par le test Network Appliance NS0-154, vous aurez une meilleure préparation avec l'aide de Pass4Test.

Code d'Examen: NS0-154
Nom d'Examen: Network Appliance (Data ONTAP 8.0 7-Mode Administrator)
Questions et réponses: 148 Q&As

Avec l'aide du Pass4Test, vous allez passer le test de Certification Network Appliance NS0-154 plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de Network Appliance NS0-154, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.

Vous pouvez trouver un meilleur boulot dans l'industrie IT à travers d'obtenir le test Network Appliance NS0-154, la voie à la réussite de votre professionnel sera ouverte pour vous.

Pass4Test peut offrir la facilité aux candidats qui préparent le test Network Appliance NS0-154. Nombreux de candidats choisissent le Pass4Test à préparer le test et réussir finalement à la première fois. Les experts de Pass4Test sont expérimentés et spécialistes. Ils profitent leurs expériences riches et connaissances professionnelles à rechercher la Q&A Network Appliance NS0-154 selon le résumé de test réel Network Appliance NS0-154. Vous pouvez réussir le test à la première fois sans aucune doute.

Pass4Test provide non seulement le produit de qualité, mais aussi le bon service. Si malheureusement vous ne pouvez pas réussir le test, votre argent sera tout rendu. Le service de la mise à jour gratuite est aussi pour vous bien que vous passiez le test Certification.

NS0-154 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-154.html

NO.1 Which set of protocols provide block-level access to NetApp storage?
A.CIFS and NFS
B.HTTP and FTP
C. iSCSI and FCP
D.SNA and RPC
Answer: C

certification Network Appliance   NS0-154   NS0-154 examen   NS0-154

NO.2 Host multi-pathing describes a _________ solution that has at least two distinct _________ paths to a
LUN.
A.FC or IP SAN, physical
B.FC or IP SAN, virtual
C.FC SAN, virtual
D.token ring, physical
Answer: A

certification Network Appliance   certification NS0-154   certification NS0-154

NO.3 Data ONTAP 8.0 7-Mode supports SMB 2.0 in Windows Vista and Windows Server 2008.
A.True
B.False
Answer: B

Network Appliance   NS0-154   NS0-154   NS0-154   NS0-154

NO.4 If the security style is set to UNIX, CIFS client file access is determined by ___________ .
A.NT ACLs
B.the last client to set permissions
C.the mapped UNIX UID/GID of the CIFS client and the UNIX file permissions
D.This is not allowed: A CIFS client cannot access files in a path set to a security style of UNIX
Answer: C

Network Appliance   NS0-154   NS0-154 examen   NS0-154

NO.5 Which changes the NDMP password on the Open System SnapVault agent?
A.password
B.password
C.svpasswd
D.svpassword
Answer: D

Network Appliance examen   NS0-154   NS0-154 examen   NS0-154

NO.6 For automatic user name mapping to occur for a CIFS and UNIX user name that are the same, you
must do what?
A.Enter the CIFS user in the NIS database.
B.Enter the user names in the /etc/hosts.equiv file.
C.Use both a NIS server and a Domain Controller in the network.
D.Nothing: mapping will occur if user name authentication is available.
Answer: D

Network Appliance   NS0-154   NS0-154   NS0-154 examen   NS0-154 examen   NS0-154

NO.7 NTFS allows file access based on ___________.
A.NT ACLs and SID.
B.NT ACLs and UNIX permissions.
C.SID and password.
D.UNIX permissions.
Answer: A

Network Appliance examen   NS0-154 examen   NS0-154 examen   NS0-154

NO.8 Which two will allow you to read and analyze a packet trace file generated by the storage system?
(Choose two.)
A.Eternal View
B.Netmon
C.pktt
D.WireShark
Answer: BD

Network Appliance   certification NS0-154   NS0-154 examen   NS0-154

NO.9 Which two commands on the storage system allow you to gather detailed statistics about network
interfaces, including basic information about network connections? (Choose two.)
A.ifstat -a
B.netdiag -n
C.netstat -i
D.sysstat 1
Answer: AC

certification Network Appliance   NS0-154 examen   NS0-154   NS0-154   NS0-154 examen   certification NS0-154

NO.10 To determine the version of Data ONTAP in which a bug has been fixed, use the NOW site _______
utility. (Choose two.)
A.AutoSupport
B.Bugs Online
C.NetApp Diagnostics
D.Release Comparison
E.System Configuration Guide
Answer: BD

Network Appliance   NS0-154 examen   NS0-154   NS0-154   NS0-154 examen

NO.11 Which three protocols can coexist on a NetApp storage system? (Choose three.)
A.CIFS
B.DAFS
C.DFS
D.FCP
E.NFS
Answer: ADE

Network Appliance   NS0-154 examen   NS0-154   NS0-154   certification NS0-154

NO.12 Which three items are NFS resources for export? (Choose three.)
A.aggregate
B.directory/qtree
C.file
D.subnet
E.volume
Answer: BCE

certification Network Appliance   NS0-154 examen   certification NS0-154   NS0-154   NS0-154 examen

NO.13 Which two commands can be used to enable LUN reservations? (Choose two.)
A.lun create
B.lun map
C.lun reservation set
D.lun set reservation
Answer: AD

Network Appliance   NS0-154 examen   NS0-154   NS0-154   NS0-154

NO.14 To configure a storage system as a member of a Windows active directory domain, the time on the
storage system must be set to be within plus or minus five minutes of the time on the domain controller.
A.True
B.False
Answer: A

Network Appliance examen   NS0-154 examen   NS0-154   certification NS0-154

NO.15 In a tape environment after a SnapRestore reversion of a volume, incremental backup and restore
operations on the file or volume cannot rely on the timestamps to determine what data needs to be
backed up or restored. Which course of action ensures correct incremental backups?
A.Perform a base-level backup of the volume after you restore it.
B.Reboot the storage system to reset timestamps back to their original times before the reversion.
C.Take a new snapshot of the volume to create new base-level timestamps for the incremental backup.
D.Take a new snapshot of the volume to create new base-level timestamps for the incremental backup,
and then perform a base-level backup of the volume after you restore it.
Answer: A

Network Appliance examen   NS0-154   NS0-154   certification NS0-154

NO.16 Which three licenses are required for fabric-attached MetroCluster? (Choose three.)
A.Cluster
B.Cluster_remote
C.Syncmirror_local
D.Syncmirror_fabric
E.Syncmirror_remote
Answer: ABC

Network Appliance   NS0-154 examen   NS0-154   NS0-154

NO.17 What utility on the storage system will allow you to capture network packet information?
A.netstats
B.pktt
C.snoop
D.traceroute
Answer: B

certification Network Appliance   NS0-154 examen   certification NS0-154   NS0-154 examen

NO.18 Which are three characteristics of an iSCSI or FCP SAN implementation? (Choose three.)
A.A LUN can be converted into a VLD.
B.LUNs can be accessed using the FCP protocol.
C.LUNs can be accessed using the iSCSI protocol.
D.Block services are associated with an iSCSI or FCP SAN environment.
Answer: BCD

certification Network Appliance   certification NS0-154   NS0-154 examen   NS0-154 examen

NO.19 Which three /etc/snapmirror.conf entries will support synchronous or semi-synchronous SnapMirror?
(Choose three.)
A.FilerA:source_vol FilerB:destination_vol - sync
B.FilerA:source_vol FilerB:destination_vol - 0-55/5 * * *
C.FilerA:source_vol FilerB:destination_vol outstanding=3s sync
D.FilerA:source_vol FilerB:destination_vol visibility_interval=1hr, outstanding=3ms, cksum=crc32 sync
Answer: ACD

Network Appliance   certification NS0-154   certification NS0-154   NS0-154

NO.20 An iSCSI or FC SAN implementation provides _____ access to LUNs.
A.block
B.file
C.VIIP
D.VLD
Answer: A

certification Network Appliance   certification NS0-154   NS0-154

Pass4Test est un site qui peut réalise le rêve de beaucoup de professionnels. Pass4Test peut vous donner un coup de main pour réussir le test Certification Network Appliance NS0-154 via son guide d'étude. Est-ce que vous vous souciez de test Certification Network Appliance NS0-154? Est-ce que vous êtes en cours de penser à chercher quelques Q&As à vous aider? Pass4Test peut résoudre ces problèmes. Les documentations offertes par Pass4Test peuvent vous provider une préparation avant le test plus efficace. Le test de simulation de Pass4Test est presque le même que le test réel. Étudier avec le guide d'étude de Pass4Test, vous pouvez passer le test avec une haute note.

2013年9月21日星期六

Le dernier examen Network Appliance NS0-154 gratuit Télécharger

Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.

Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification Network Appliance NS0-154. Il n'y a pas de soucis à réussir le test avec une haute note.

Le suucès n'est pas loin de vous une fois que vous choisissez le produit de Q&A Network Appliance NS0-154 de Pass4Test.

Le test Network Appliance NS0-154 est bien populaire dans l'Industrie IT. Donc il y a de plus en plus de gens à participer le test Network Appliance NS0-154. En fait, c'est pas facile à passer le test si on n'a pas une formation particulière. Pass4Test peut vous aider à économiser le temps et les efforts à réussir le test Certification.

Code d'Examen: NS0-154
Nom d'Examen: Network Appliance (Data ONTAP 8.0 7-Mode Administrator)
Questions et réponses: 148 Q&As

Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.

Pass4Test est un bon catalyseur du succès pour les professionnels IT. Beaucoup de gens passer le test Network Appliance NS0-154 avec l'aide de l'outil formation. Les experts profitent leurs expériences riches et connaissances à faire sortir la Q&A Network Appliance NS0-154 plus nouvelle qui comprend les exercices de pratiquer et le test simulation. Vous pouvez passer le test Network Appliance NS0-154 plus facilement avec la Q&A de Pass4Test.

NS0-154 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-154.html

NO.1 Data ONTAP 8.0 7-Mode supports SMB 2.0 in Windows Vista and Windows Server 2008.
A.True
B.False
Answer: B

Network Appliance   NS0-154   certification NS0-154   NS0-154   NS0-154

NO.2 Which three licenses are required for fabric-attached MetroCluster? (Choose three.)
A.Cluster
B.Cluster_remote
C.Syncmirror_local
D.Syncmirror_fabric
E.Syncmirror_remote
Answer: ABC

Network Appliance examen   NS0-154 examen   NS0-154

NO.3 Host multi-pathing describes a _________ solution that has at least two distinct _________ paths to a
LUN.
A.FC or IP SAN, physical
B.FC or IP SAN, virtual
C.FC SAN, virtual
D.token ring, physical
Answer: A

Network Appliance   NS0-154   NS0-154   NS0-154

NO.4 Which two will allow you to read and analyze a packet trace file generated by the storage system?
(Choose two.)
A.Eternal View
B.Netmon
C.pktt
D.WireShark
Answer: BD

Network Appliance examen   NS0-154 examen   NS0-154 examen   certification NS0-154   NS0-154

NO.5 NTFS allows file access based on ___________.
A.NT ACLs and SID.
B.NT ACLs and UNIX permissions.
C.SID and password.
D.UNIX permissions.
Answer: A

Network Appliance   NS0-154 examen   NS0-154   NS0-154   NS0-154 examen

NO.6 An iSCSI or FC SAN implementation provides _____ access to LUNs.
A.block
B.file
C.VIIP
D.VLD
Answer: A

certification Network Appliance   NS0-154   NS0-154   NS0-154 examen

NO.7 If the security style is set to UNIX, CIFS client file access is determined by ___________ .
A.NT ACLs
B.the last client to set permissions
C.the mapped UNIX UID/GID of the CIFS client and the UNIX file permissions
D.This is not allowed: A CIFS client cannot access files in a path set to a security style of UNIX
Answer: C

Network Appliance   NS0-154   certification NS0-154

NO.8 Which two commands on the storage system allow you to gather detailed statistics about network
interfaces, including basic information about network connections? (Choose two.)
A.ifstat -a
B.netdiag -n
C.netstat -i
D.sysstat 1
Answer: AC

Network Appliance   NS0-154   certification NS0-154   NS0-154

NO.9 Which three /etc/snapmirror.conf entries will support synchronous or semi-synchronous SnapMirror?
(Choose three.)
A.FilerA:source_vol FilerB:destination_vol - sync
B.FilerA:source_vol FilerB:destination_vol - 0-55/5 * * *
C.FilerA:source_vol FilerB:destination_vol outstanding=3s sync
D.FilerA:source_vol FilerB:destination_vol visibility_interval=1hr, outstanding=3ms, cksum=crc32 sync
Answer: ACD

Network Appliance   certification NS0-154   NS0-154   NS0-154   certification NS0-154   NS0-154 examen

NO.10 Which changes the NDMP password on the Open System SnapVault agent?
A.password
B.password
C.svpasswd
D.svpassword
Answer: D

Network Appliance   NS0-154   NS0-154 examen

NO.11 Which two commands can be used to enable LUN reservations? (Choose two.)
A.lun create
B.lun map
C.lun reservation set
D.lun set reservation
Answer: AD

Network Appliance   NS0-154 examen   NS0-154   NS0-154   NS0-154 examen

NO.12 What utility on the storage system will allow you to capture network packet information?
A.netstats
B.pktt
C.snoop
D.traceroute
Answer: B

Network Appliance   certification NS0-154   NS0-154   NS0-154 examen

NO.13 Which three items are NFS resources for export? (Choose three.)
A.aggregate
B.directory/qtree
C.file
D.subnet
E.volume
Answer: BCE

Network Appliance examen   NS0-154   NS0-154   NS0-154

NO.14 In a tape environment after a SnapRestore reversion of a volume, incremental backup and restore
operations on the file or volume cannot rely on the timestamps to determine what data needs to be
backed up or restored. Which course of action ensures correct incremental backups?
A.Perform a base-level backup of the volume after you restore it.
B.Reboot the storage system to reset timestamps back to their original times before the reversion.
C.Take a new snapshot of the volume to create new base-level timestamps for the incremental backup.
D.Take a new snapshot of the volume to create new base-level timestamps for the incremental backup,
and then perform a base-level backup of the volume after you restore it.
Answer: A

Network Appliance   certification NS0-154   NS0-154   NS0-154 examen   NS0-154

NO.15 For automatic user name mapping to occur for a CIFS and UNIX user name that are the same, you
must do what?
A.Enter the CIFS user in the NIS database.
B.Enter the user names in the /etc/hosts.equiv file.
C.Use both a NIS server and a Domain Controller in the network.
D.Nothing: mapping will occur if user name authentication is available.
Answer: D

Network Appliance   NS0-154   certification NS0-154   certification NS0-154

NO.16 Which are three characteristics of an iSCSI or FCP SAN implementation? (Choose three.)
A.A LUN can be converted into a VLD.
B.LUNs can be accessed using the FCP protocol.
C.LUNs can be accessed using the iSCSI protocol.
D.Block services are associated with an iSCSI or FCP SAN environment.
Answer: BCD

Network Appliance   certification NS0-154   certification NS0-154   NS0-154 examen

NO.17 Which three protocols can coexist on a NetApp storage system? (Choose three.)
A.CIFS
B.DAFS
C.DFS
D.FCP
E.NFS
Answer: ADE

Network Appliance   NS0-154   NS0-154   certification NS0-154

NO.18 Which set of protocols provide block-level access to NetApp storage?
A.CIFS and NFS
B.HTTP and FTP
C. iSCSI and FCP
D.SNA and RPC
Answer: C

Network Appliance   certification NS0-154   certification NS0-154

NO.19 To configure a storage system as a member of a Windows active directory domain, the time on the
storage system must be set to be within plus or minus five minutes of the time on the domain controller.
A.True
B.False
Answer: A

Network Appliance   NS0-154   NS0-154 examen   NS0-154   NS0-154 examen

NO.20 To determine the version of Data ONTAP in which a bug has been fixed, use the NOW site _______
utility. (Choose two.)
A.AutoSupport
B.Bugs Online
C.NetApp Diagnostics
D.Release Comparison
E.System Configuration Guide
Answer: BD

Network Appliance examen   NS0-154 examen   NS0-154   NS0-154

Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test Network Appliance NS0-154 est une bonne examination. Mais c'est difficile à passer le test Network Appliance NS0-154. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.

2013年9月15日星期日

Network Appliance NS0-154, de formation et d'essai

Le test Certification Network Appliance NS0-154 est une chance précieuse à augmenter vos connaissances de technologie informatique dans l'industrie IT. Il attire beaucoup de professionls à participer ce test. Pass4Test peut vous offrir les outils de formation particuliers à propos de test Network Appliance NS0-154. Vous réaliserez plus tôt votre rêve avec la Q&A écrite par l'équipe professionnelle de Pass4Test. Pass4Test se contribue à vous donner un coup de main pour réussir le test Network Appliance NS0-154.

Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test Network Appliance NS0-154.

Code d'Examen: NS0-154
Nom d'Examen: Network Appliance (Data ONTAP 8.0 7-Mode Administrator)
Questions et réponses: 148 Q&As

On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification Network Appliance NS0-154. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.

Le test Network Appliance NS0-154 est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test Network Appliance NS0-154 est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat Network Appliance NS0-154 sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test Network Appliance NS0-154 avec l'aide de Pass4Test.

Est-ce que vous vous souciez encore pour passer le test Network Appliance NS0-154? Pourquoi pas choisir la formation en Internet dans une société de l'informatique. Un bon choix de l'outil formation peut résoudre le problème de prendre grande quantité de connaissances demandées par le test Network Appliance NS0-154, et vous permet de préparer mieux avant le test. Les experts de Pass4Test travaillent avec tous efforts à produire une bonne Q&A ciblée au test Network Appliance NS0-154. La Q&A est un bon choix pour vous. Vous pouvez télécharger le démo grantuit tout d'abord en Internet.

Vous choisissez l'aide de Pass4Test, Pass4Test fait tous effort à vous aider à réussir le test. De plus, la mise à jour de Q&A pendant un an est gratuite pour vous. Vous n'avez plus raison à hésiter. Pass4Test est une meilleure assurance pour le succès de test Network Appliance NS0-154. Ajoutez la Q&A au panier.

NS0-154 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-154.html

NO.1 To determine the version of Data ONTAP in which a bug has been fixed, use the NOW site _______
utility. (Choose two.)
A.AutoSupport
B.Bugs Online
C.NetApp Diagnostics
D.Release Comparison
E.System Configuration Guide
Answer: BD

Network Appliance   certification NS0-154   NS0-154 examen

NO.2 Which two will allow you to read and analyze a packet trace file generated by the storage system?
(Choose two.)
A.Eternal View
B.Netmon
C.pktt
D.WireShark
Answer: BD

Network Appliance   NS0-154 examen   NS0-154   NS0-154

NO.3 NTFS allows file access based on ___________.
A.NT ACLs and SID.
B.NT ACLs and UNIX permissions.
C.SID and password.
D.UNIX permissions.
Answer: A

certification Network Appliance   NS0-154   NS0-154   NS0-154   NS0-154 examen

NO.4 Which are three characteristics of an iSCSI or FCP SAN implementation? (Choose three.)
A.A LUN can be converted into a VLD.
B.LUNs can be accessed using the FCP protocol.
C.LUNs can be accessed using the iSCSI protocol.
D.Block services are associated with an iSCSI or FCP SAN environment.
Answer: BCD

certification Network Appliance   certification NS0-154   NS0-154

NO.5 An iSCSI or FC SAN implementation provides _____ access to LUNs.
A.block
B.file
C.VIIP
D.VLD
Answer: A

certification Network Appliance   NS0-154   NS0-154   NS0-154 examen   NS0-154

NO.6 Which three licenses are required for fabric-attached MetroCluster? (Choose three.)
A.Cluster
B.Cluster_remote
C.Syncmirror_local
D.Syncmirror_fabric
E.Syncmirror_remote
Answer: ABC

Network Appliance   NS0-154 examen   NS0-154   certification NS0-154

NO.7 If the security style is set to UNIX, CIFS client file access is determined by ___________ .
A.NT ACLs
B.the last client to set permissions
C.the mapped UNIX UID/GID of the CIFS client and the UNIX file permissions
D.This is not allowed: A CIFS client cannot access files in a path set to a security style of UNIX
Answer: C

Network Appliance   NS0-154   NS0-154   certification NS0-154

NO.8 Which two commands on the storage system allow you to gather detailed statistics about network
interfaces, including basic information about network connections? (Choose two.)
A.ifstat -a
B.netdiag -n
C.netstat -i
D.sysstat 1
Answer: AC

Network Appliance   NS0-154 examen   NS0-154   NS0-154 examen   NS0-154 examen

NO.9 Which changes the NDMP password on the Open System SnapVault agent?
A.password
B.password
C.svpasswd
D.svpassword
Answer: D

Network Appliance   NS0-154   NS0-154 examen   NS0-154   certification NS0-154

NO.10 To configure a storage system as a member of a Windows active directory domain, the time on the
storage system must be set to be within plus or minus five minutes of the time on the domain controller.
A.True
B.False
Answer: A

Network Appliance   NS0-154 examen   certification NS0-154   NS0-154

NO.11 Which three /etc/snapmirror.conf entries will support synchronous or semi-synchronous SnapMirror?
(Choose three.)
A.FilerA:source_vol FilerB:destination_vol - sync
B.FilerA:source_vol FilerB:destination_vol - 0-55/5 * * *
C.FilerA:source_vol FilerB:destination_vol outstanding=3s sync
D.FilerA:source_vol FilerB:destination_vol visibility_interval=1hr, outstanding=3ms, cksum=crc32 sync
Answer: ACD

Network Appliance   NS0-154 examen   certification NS0-154   NS0-154 examen

NO.12 For automatic user name mapping to occur for a CIFS and UNIX user name that are the same, you
must do what?
A.Enter the CIFS user in the NIS database.
B.Enter the user names in the /etc/hosts.equiv file.
C.Use both a NIS server and a Domain Controller in the network.
D.Nothing: mapping will occur if user name authentication is available.
Answer: D

certification Network Appliance   NS0-154   NS0-154 examen   NS0-154   NS0-154

NO.13 Which three items are NFS resources for export? (Choose three.)
A.aggregate
B.directory/qtree
C.file
D.subnet
E.volume
Answer: BCE

Network Appliance   certification NS0-154   NS0-154 examen   NS0-154   NS0-154

NO.14 Data ONTAP 8.0 7-Mode supports SMB 2.0 in Windows Vista and Windows Server 2008.
A.True
B.False
Answer: B

Network Appliance   NS0-154   NS0-154 examen   NS0-154   NS0-154

NO.15 In a tape environment after a SnapRestore reversion of a volume, incremental backup and restore
operations on the file or volume cannot rely on the timestamps to determine what data needs to be
backed up or restored. Which course of action ensures correct incremental backups?
A.Perform a base-level backup of the volume after you restore it.
B.Reboot the storage system to reset timestamps back to their original times before the reversion.
C.Take a new snapshot of the volume to create new base-level timestamps for the incremental backup.
D.Take a new snapshot of the volume to create new base-level timestamps for the incremental backup,
and then perform a base-level backup of the volume after you restore it.
Answer: A

certification Network Appliance   NS0-154 examen   NS0-154 examen   NS0-154 examen

NO.16 Which two commands can be used to enable LUN reservations? (Choose two.)
A.lun create
B.lun map
C.lun reservation set
D.lun set reservation
Answer: AD

Network Appliance   certification NS0-154   NS0-154   NS0-154

NO.17 Host multi-pathing describes a _________ solution that has at least two distinct _________ paths to a
LUN.
A.FC or IP SAN, physical
B.FC or IP SAN, virtual
C.FC SAN, virtual
D.token ring, physical
Answer: A

Network Appliance   NS0-154   NS0-154   NS0-154 examen

NO.18 Which three protocols can coexist on a NetApp storage system? (Choose three.)
A.CIFS
B.DAFS
C.DFS
D.FCP
E.NFS
Answer: ADE

Network Appliance   NS0-154   NS0-154   NS0-154

NO.19 Which set of protocols provide block-level access to NetApp storage?
A.CIFS and NFS
B.HTTP and FTP
C. iSCSI and FCP
D.SNA and RPC
Answer: C

Network Appliance   certification NS0-154   NS0-154 examen   NS0-154 examen   NS0-154 examen   NS0-154

NO.20 What utility on the storage system will allow you to capture network packet information?
A.netstats
B.pktt
C.snoop
D.traceroute
Answer: B

Network Appliance   NS0-154   NS0-154   NS0-154 examen

Vous Network Appliance NS0-154 pouvez télécharger le démo Network Appliance NS0-154 gratuit dans le site Pass4Test pour essayer notre qualité. Une fois vous achetez le produit de Pass4Test, nous allons faire tous effort à vous aider à réussir le test à la première fois et vous laisser savoir qu'il ne faut pas beaucoup de travaux pour réussir ce que vous voulez.