Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat GAQM LCP-001. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test GAQM LCP-001. Choisir le produit de Pass4Test particulier pour le test Certification GAQM LCP-001 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.
Dans cette société de plus en plus intense, nous vous proposons à choisir une façon de se former plus efficace : moins de temps et d'argent dépensé. Pass4Test peut vous offrir une bonne solution avec une plus grande space à développer.
Le test GAQM CLSSGB est populaire dans l'Industrie IT. Il y a beaucoup de professionnels IT veulent ce passport de IT. Votre vie et salaire sera améliorée avec ce Certificat. Vous aurez une meilleure assurance.
C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.
Code d'Examen: LCP-001
Nom d'Examen: GAQM (Linux Certified Professional (LCP) Powered by LPI)
Questions et réponses: 289 Q&As
Code d'Examen: CEH-001
Nom d'Examen: GAQM (Certified Ethical Hacker (CEH))
Questions et réponses: 878 Q&As
Code d'Examen: CLSSGB
Nom d'Examen: GAQM (Certified Lean Six Sigma Green Belt (CLSSGB))
Questions et réponses: 200 Q&As
Pass4Test est un site web qui vous donne plus de chances à passer le test de Certification GAQM LCP-001. Le résultat de recherche sortis par les experts de Pass4Test peut assurer que ce sera vous ensuite qui réussirez le test GAQM LCP-001. Choisissez Pass4Test, choisissez le succès. L'outil de se former de Pass4Test est bien efficace. Parmi les gens qui ont déjà passé le test, la majorité a préparé le test avec la Q&A de Pass4Test.
Le programme de formation GAQM CEH-001 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.
LCP-001 Démo gratuit à télécharger: http://www.pass4test.fr/LCP-001.html
NO.1 You need to know where all the configuration files for the installed package named "postfix"
are located. Assuming it was installed with rpm, which command will list this information for you?
A. rpm -qc postfix
B. rpm -Vc postfix
C. rpm --config postfix
D. rpm -listconfig postfix
E. rpm -qa --config postfix
Answer: A
GAQM examen LCP-001 LCP-001 examen certification LCP-001 LCP-001 LCP-001 examen
NO.2 How can you update a package only if an earlier version is currently installed on the system?
A. rmp -- update rpmname
B. rpm -U rpmname
C. rpm -F rpmname
D. rpm -- force rpmname
E. rpm -u rpmname
Answer: C
GAQM LCP-001 LCP-001 examen LCP-001
Explanation:
Upgrades, but only if the package is currently installed.
NO.3 You are installing Linux on a workstation for a new employee. Which partition should be
largest?
A. /
B. /boot
C. /lib
D. /usr
Answer: D
certification GAQM LCP-001 certification LCP-001 LCP-001 examen
6. You are about to install a new program on an RPM based Linux system. Which of the following
would be the best way to accomplish this?
A. Get the source code in a tarball and install from that source.
B. Get a source RPM and use rpm to install it.
C. Use rpm to install the program's binaries from an RPM package.
D. Use cpi to extract the binaries from a source RPM and use rpm to install those sources.
Answer: C
GAQM examen LCP-001 examen LCP-001 LCP-001
7. What tool can you use to print shared library dependencies?
A. ldconfig
B. ldd
C. libdep
D. libpath
E. ldev
Answer: B
GAQM certification LCP-001 certification LCP-001 LCP-001 examen
Explanation:
ldd command prints the shared libraries required by each program or shared library specified on the
command line. Example: ldd libdb.so.3 libc.so.6 => /lib/tls/libc.so.6 (0x00237000) /lib/ld-linux.so.2
(0x0021e000)
8. What program is needed to establish a PPP link to another computer?
A. pppd
B. wvdial
C. papd
D. kppp
Answer: A
GAQM examen LCP-001 examen LCP-001 examen LCP-001 examen
Explanation:
wvdial - PPP dialer with built-in intelligence. wvdial is an intelligent PPP dialer, which means that it
dials a modem and starts PPP in order to connect to the Internet. It is something like the chat(8)
program, except that it uses heuristics to guess how to dial and log into your server rather than
forcing you to write a login script.
9. You need to install a fax server. Which type of fax/modem should you install to insure Linux
compatibility?
A. External Serial Fax/modem
B. External USB Fax/modem
C. Internal ISA Fax/modem
D. Internal PCI Fax/modem
Answer: A
GAQM examen certification LCP-001 LCP-001 examen
10. You are running Linux 2.0.36 and you need to add a USB mouse to your system. Which of the
following statements is true?
A. You need to rebuild the kernel.
B. You need to upgrade the kernel.
C. You need to load the USB modules for your existing modular kernel.
D. USB support is no available in Linux.
Answer: B
GAQM examen LCP-001 certification LCP-001 certification LCP-001 LCP-001 examen
11. If Linux detects an ACPI BIOS on bootup, what does it automatically deactivate?
A. PnP
B. PCI
C. ATA
D. APM
Answer: D
GAQM LCP-001 LCP-001 LCP-001
12. Where can lilo place boot code?
A. The boot ROM
B. The boot RAM
C. The /boot partition
D. The MBR on a hard drive
Answer: D
GAQM examen LCP-001 LCP-001 examen
13. The lspci command can display information about devices except the following:
A. Card bus speed (e.g. 66Mhz)
B. Card IRQ settings
C. Card vendor identification
D. Card AGP rate (e.g. 1x, 2x, 4x)
E. Card Ethernet MAC address
Answer: E
GAQM examen LCP-001 examen certification LCP-001
Explanation:
lspci is a utility for displaying information about all PCI buses in the system and all devices
connected to them. To display the MAC address of Ethernet, we use the ifconfig command.
14. What command would help you identify the I/O address range being used by the network
card?
A. cat/proc/modules
B. cat/proc/devices
C. cat/proc/meminfo
D. cat/io/dma
E. cat/proc/ioports
Answer: E
GAQM examen certification LCP-001 certification LCP-001 certification LCP-001 certification LCP-001 certification LCP-001
15. You have just upgraded your PC to a 60 gigabyte IDE drive. While partitioning the drive, you
notice that only 32 gigabytes are available. Which of the following will most likely allow you to use
the entire drive?
A. Create two smaller partitions of 30 gigabytes each.
B. Set the PC BIOS to use LBA mode.
C. Create a partition that resides entirely below the first 1024 cylinders.
D. Use GRUB or the latest version of LILO as a bootloader.
E. Upgrade the PC BIOS to the latest version available.
Answer: E
GAQM certification LCP-001 certification LCP-001 LCP-001 LCP-001 examen LCP-001 examen
16. While installing from source code you don't see the configuration script. What command can
you run to compile the code?
A. make configure
B. install
C. install makefile
D. make
Answer: D
GAQM examen LCP-001 examen LCP-001 examen LCP-001 examen
Explanation:
The purpose of the make utility is to determine automatically which pieces of a large program need
to be recompiled, and issue the commands to recompile them. example C programs, since they are
most common, but you can use make with any programming language whose compiler can be run
with a shell command. In fact, make is not limited to programs. You can use it to describe any task
where some files must be updated automatically from others whenever the others change. To
prepare to use make, you must write a file called the makefile that describes the relationships
among files in your program, and the states the commands for updating each file. In a
program,typically the executable file is updated from object files, which are in turn made by
compiling source files. So, make command compile the source code.
NO.4 You are preparing a new set of shared libraries in /usr/local/applib and you have written and
compiled some code that uses these libraries. You have already performed and ldconfig, however
the system still cannot find the shared libraries. What is most likely the cause of this?A. You used
the wrong compiler.
B. You did not update your PATH variable.
C. You compiled the code with wrong library.
D. You forgot to put the library path in ld.so.conf
Answer: D
GAQM LCP-001 examen LCP-001 examen LCP-001 examen LCP-001 examen
NO.5 You have an updated RPM called screensaver-1.1.i386. rpm. You have version 1.0 installed.
Using RPM, how do you view the changelog of this file to see if you should install the update?
A. rpm -qp --changelog screensaver-1.1.i386. rpm
B. rpm --changelog screensaver-1.1.i386. rpm
C. rpm -qc screensaver-1.1.i386. rpm
D. rpm -showchangelog screensaver-1.1.i386. rpm
Answer: A
certification GAQM LCP-001 examen LCP-001 examen LCP-001 examen LCP-001 LCP-001 examen
没有评论:
发表评论