Microsoft meilleur examen 70-664, questions et réponses

Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A Microsoft 70-664 dans Pass4Test pour se former avant le test Microsoft 70-664.

On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification Microsoft 70-664. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.

Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.

Pass4Test vous offre un choix meilleur pour faire votre préparation de test Microsoft 70-664 plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de Microsoft 70-664 à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test Microsoft 70-664 sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.

La Q&A Microsoft 70-664 est étudiée par les experts de Pass4Test qui font tous effort en profitant leurs connaissances professionnelles. La Q&A de Pass4Test est ciblée aux candidats de test IT Certification. Vous voyez peut-être les Q&As similaires dansn les autres site web, mais il n'y a que Pass4Test d'avoir le guide d'étude plus complet. C'est le meilleur choix à s'assurer le succès de test Certification Microsoft 70-664.

Pas besoin de beaucoup d'argent et de temps, vous pouvez passer le test Microsoft 70-664 juste avec la Q&A de Microsoft 70-664 offerte par Pass4Test qui vous offre le test simulation bien proche de test réel.

Code d'Examen: 70-664
Nom d'Examen: Microsoft (TS: Microsoft Lync Server 2010, Configuring)
Questions et réponses: 80 Q&As

70-664 Démo gratuit à télécharger: http://www.pass4test.fr/70-664.html

NO.1 Your network has Lync Server 2010 deployed.
You configure Call Admission Control.
You need to enable Call Admission Control.
Which cmdlet should you run?
A. Set-CsBandwidthPolicyServiceConfiguration.
B. Set-CsMediaConfiguration.
C. Set-CsNetworkConfiguration.
D. Set-CsNetworkInterSitePolicy.
Answer: C

Microsoft examen   70-664 examen   70-664

NO.2 Your network has Lync Server 2010 deployed.
You need to ensure that when users on the PSTN receive calls from users in your organization, the calls
display the telephone number +14255551212.
What should you do?
A. From the Lync Server Management Shell, run the Set-CsVoicePolicy cmdlet.
B. From the Lync Server Management Shell, run the Set-CsCpsConfiguration cmdlet.
C. From Lync Server 2010 Control Panel, edit the Route settings.
D. From Lync Server 2010 Control Panel, create a workflow for a Response Group.
Answer: C

Microsoft   70-664   70-664   70-664   certification 70-664   70-664 examen

NO.3 You deploy a Lync Server 2010 pool and a hardware load balancer.
You plan to provide load balancing for dial-in conferencing.
You need to identify which TCP ports must be redirected on the hardware load balancer.
Which TCP ports should you identify?
A. 80 and 443
B. 5060 and 5061
C. 5072 and 5073
D. 8056 and 8057
Answer: C

Microsoft examen   70-664   70-664   70-664 examen

NO.4 Your network has a Lync Server 2010 infrastructure that contains three servers. The servers are
configured as shown in the following table.
Server2 and Server3 are in a Mediation pool.
You plan to temporarily remove Server2 from the network.
You need to prevent new voice calls from being routed to Server2.
The solution must not disconnect calls in progress.
What should you do?
A. From the Lync Server 2010 Control Panel, modify the status of Server2.
B. From the Lync Server 2010 Control Panel, modify the Voice Routing settings.
C. From the Lync Server 2010 Topology Builder, edit the properties of the PSTN gateway.
D. From the Lync Server 2010 Topology Builder, edit the properties of the Mediation pool.
Answer: A

certification Microsoft   certification 70-664   70-664 examen

NO.5 Your network has a Lync Server 2010 infrastructure that uses Enterprise Voice.
You need to enable call park for Enterprise Voice users.
You configure a call park number range.
What should you do next?
A. From the Lync Server 2010 Control Panel, edit the Voice Policy.
B. From the Lync Server 2010 Topology Builder, edit the Site settings.
C. From the Lync Management Shell, run the Set-CsCpsConfiguration cmdlet.
D. From the Lync Management Shell, run the Set-CsVoiceConfiguration cmdlet.
Answer: C

certification Microsoft   70-664 examen   70-664   70-664 examen   70-664   70-664 examen

NO.6 Your company has a country code of 1 and an area code of 425.
The network has a Lync Server 2010 infrastructure that uses Enterprise Voice.
You plan to create a normalization rule to normalize seven-digit numbers to E.164 format.
You need to identify the appropriate translation rule for the normalization rule.
Which translation rule should you identify?
A. +1$1
B. +1425
C. +1425$1
D. $111425
Answer: C

Microsoft   70-664   70-664 examen

NO.7 Your network has Lync Server 2010 deployed.
You deploy a Mediation Server, and then you configure a voice route that uses a SIP trunk.
You create a test user named User1.
You enable Enterprise Voice for User1.
You need to verify that when User1 initiates calls to external telephone numbers, the calls are routed
through the SIP trunk.
What should you run?
A. From the Lync server, run the Test-CSMCXPushNotification cmdlet.
B. From the Lync server, run the New-CsExUmContact cmdlet.
C. From the Lync server, use the Lync Logging Tool and analyze the trace with Snooper
D. From the Lync server, use the Lync Control Panel to test voice routing in the Voice Routing tab
Answer: D

Microsoft   certification 70-664   70-664   70-664 examen   70-664 examen

NO.8 Your network has Lync Server 2010 deployed.
You deploy dial-in conferencing.
You need to provide the dial-in conferencing information to all the users on the network.
What should you run?
A. lcscmd /server /action:broadcastmessage
B. ocsumutil /ou:users
C. the New-CsAnnouncement cmdlet
D. the Set-CsPinSendCAWelcomeMail cmdlet
Answer: D

Microsoft   70-664   70-664   certification 70-664

NO.9 Your company has a telephone number range of (425) 555-1200 to (425) 555-1299.
The country code is 1. The network has Lync Server 2010 deployed.
You need to create a normalization rule for four-digit extension dialing that normalizes extensions to E.164
format.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Set the translation rule to +1425555$1.
B. Set the translation rule to +142555512$1.
C. Set the translation pattern to match