On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification Juniper JN0-522. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.
Avec la version plus nouvelle de Q&A Juniper JN0-522, réussir le test Juniper JN0-522 n'est plus un rêve très loin pour vous. Pass4Test peut vous aider à réaliser ce rêve. Le test simualtion de Pass4Test est bien proche du test réel. Vous aurez l'assurance à réussir le test avec le guide de Pass4Test. Voilà, le succès est juste près de vous.
Le Certificat de Juniper JN0-522 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification Juniper JN0-522, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test JN0-522 sans aucun éffort, en même temps, le test de Juniper JN0-522 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test Juniper JN0-522 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.
C'est pas facile à passer le test Certification Juniper JN0-522, choisir une bonne formation est le premier bas de réussir, donc choisir une bonne resource des informations de test Juniper JN0-522 est l'assurance du succès. Pass4Test est une assurance comme ça. Une fois que vous choisissez le test Juniper JN0-522, vous allez passer le test Juniper JN0-522 avec succès, de plus, un an de service en ligne après vendre est gratuit pour vous.
Pour réussir le test Juniper JN0-522 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test Juniper JN0-522. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test Juniper JN0-522 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.
Code d'Examen: JN0-522
Nom d'Examen: Juniper (FXV,Associate (JNCIA-FWV))
Questions et réponses: 160 Q&As
Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.
Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test Juniper JN0-522. La ressourece providée par Pass4Test peut juste s'accorder votre demande.
JN0-522 Démo gratuit à télécharger: http://www.pass4test.fr/jn0-522.html
NO.1 Which ScreenOS CLI command would be used to view traffic logs?
A.get traffic
B.get log policy
C.get policy log
D.get log traffic
Answer:D
Juniper JN0-522 examen certification JN0-522 JN0-522 examen JN0-522
NO.2 Which command can you use to view the log of IKE negotiations and results?
A.get event type 536
B.get ike cookie
C.get sa active
D.debug ike basic
Answer:A
certification Juniper JN0-522 JN0-522 JN0-522 examen
NO.3 What is the purpose of the VLAN1 interface?
A.It provides policy-based NAT for 802.1Q VLANs.
B.It provides an interface that can be used with 802.1Q VLANs in transparent mode.
C.It provides the ScreenOS device with a routable IP address while operating in route mode.
D.It provides an interface that can be used to remotely manage the ScreenOS device while operating in
transparent mode.
Answer:D
Juniper JN0-522 JN0-522 examen JN0-522 examen
NO.4 Which ScreenOS CLI command is required to enable a policy during specified times, days, or dates?
A.set time
B.set clock
C.set calendar
D.set scheduler
Answer:D
Juniper JN0-522 JN0-522
NO.5 Click the Exhibit button. In the exhibit, which routing command would allow host A to communicate with
host C? (Note: Assume a route from the SSG 20 to host A's subnet already exists.)
A.set route 0.0.0.0/0 int e0/3 gateway 177.11.56.254
B.set route 1.1.70.0 interface e0/3 gateway 177.11.56.254
C.configure route 1.1.70.0/24 gateway 177.11.56.254 int e0/3
D.set route 1.1.70.0/24 interface e0/3 gateway 177.11.56.254
Answer:D
Juniper certification JN0-522 JN0-522 JN0-522
NO.6 What needs to be configured in Phase 2 of a route-based VPN, that does not need to be configured in a
policy-based VPN?
A.proxy-id
B.tunnel-binding
C.transport mode
D.custom proposals
Answer:B
Juniper JN0-522 JN0-522 examen JN0-522
NO.7 What is the purpose of the "Permitted IP" address on a ScreenOS device?
A.It defines a list of addresses that are trusted to perform management on the ScreenOS device.
B.It is used in policy rules to determine which user traffic is allowed through the ScreenOS device.
C.It defines which range of addresses that can access devices connected to the ScreenOS device.
D.It is the address that an external device uses to gain management access to a ScreenOS device.
Answer:A
Juniper JN0-522 examen JN0-522 JN0-522
NO.8 Click the Exhibit button. In the exhibit, what is the correct address book entry for host C?
A.set address C 1.1.70.250/32
B.set address Partner C 1.1.70.250
C.set address Partner 1.1.70.250/32
D.set address Partner C 1.1.70.250/32
Answer:D
Juniper JN0-522 certification JN0-522 JN0-522
NO.9 You want to minimize the number of IP addresses, subnets, and policies in use. How should you
configure your tunnel interface?
A.Configure the tunnel interface with an IP address with a 32 bit subnet mask.
B.Configure the tunnel interface with an IP address with a 30 bit subnet mask.
C.Configure the tunnel interface as unnumbered and place the interface in the same zone as the
designated interface.
D.Configure the tunnel interface as unnumbered, but place the tunnel interface in a different zone than the
designated interface.
Answer:C
certification Juniper certification JN0-522 certification JN0-522 JN0-522 JN0-522
NO.10 Click the Exhibit button. In the exhibit, which two forms of address translation would have generated
the output shown? (Choose two.)
A.MIP
B.NAT-src with no DIP
C.Interface-based translation
D.NAT-src with a DIP, fixed-port disabled
Answer:B C
certification Juniper certification JN0-522 JN0-522 JN0-522 examen
NO.11 Which ScreenOS CLI command would be useful for troubleshooting a policy deny?
A.get flow debug
B.debug flow basic
C.exec flow analysis
D.debug session basic
Answer:B
Juniper certification JN0-522 JN0-522 examen
NO.12 Which ScreenOS CLI policy statement keyword would enable a policy only during specified times, days,
and/or dates?
A.at
B.calendar
C.schedule
D.scheduler
Answer:C
Juniper certification JN0-522 JN0-522 JN0-522 JN0-522 examen
NO.13 What are two benefits of configuring a ScreenOS device in transparent mode? (Choose two.)
A.There is no need to reconfigure the IP addresses of routers or protected servers.
B.There is no need to create MIPs or VIPs for incoming traffic to reach protected servers.
C.Policies are easier to create since you do not have to include source and destination IP addresses.
D.The product can support more VPNs and obtain greater throughput because there is less overhead to
manage.
Answer:A B
Juniper certification JN0-522 JN0-522 JN0-522 JN0-522
NO.14 Assuming factory default settings, which statement describes the minimum requirements for WebUI
management access to the SSG 5?
A.Connect a PC addressed on the 192.168.1.0 subnet to any interface, open a browser and access
192.168.1.1.
B.Terminate the bootup sequence from the console device, open a browser on the console device and
access 192.168.1.1.
C.Connect a PC addressed on the 192.168.1.0 subnet, to the highest numbered interface and open a
browser and access 192.168.1.1.
D.Using the CLI, define an IP address on a physical interface, connect a PC to the interface and open a
browser to the interface address.
Answer:C
Juniper JN0-522 examen JN0-522 examen JN0-522 JN0-522 examen
NO.15 Your VPN tunnel does not pass traffic. You run the get ike cookie command and discover that there is no
cookie. Which two should be verified? (Choose two.)
A.routes
B.Phase 1 configuration options
C.Phase 2 configuration options
D.selected quick mode encryption algorithms
Answer:A B
Juniper examen JN0-522 examen certification JN0-522 JN0-522 examen JN0-522
NO.16 Click the Exhibit button. In the exhibit, what is the correct command to configure a default route on the
SSG 20?
A.set route 0.0.0.0/0 vrouter untrust
B.set route 0.0.0.0/0 interface e0/4 gateway 143.45.56.254
C.set route 0.0.0.0/0 interface e0/4 next-hop 143.45.56.254
D.set route 0.0.0.0/0 interface 143.45.56.1 gate 143.45.56.254
Answer:B
Juniper JN0-522 JN0-522 examen JN0-522 JN0-522
NO.17 You enter the following command: set int e0/8 mip 1.1.8.32 host 10.1.10.32 netmask 255.255.255.255
How many MIP address translations have you just configured?
A.1
B.8
C.128
D.256
Answer:A
certification Juniper JN0-522 JN0-522
NO.18 Which statement is correct about tunnel interfaces?
A.They can have overlapping IP addresses.
B.They need to be configured in the zone where the protected resources reside.
C.They can be unnumbered and used in policy-based translations if the interface is in route mode.
D.They can be unnumbered from any interface residing on the same virtual router as the protected
resources.
Answer:D
Juniper JN0-522 JN0-522 examen certification JN0-522 JN0-522
NO.19 Click the Exhibit button. In the exhibit, if host A initiates a Web browsing session with host D, and the
E0/1 interface of the SSG 20 is in NAT mode, what will be the source address of the packet arriving at
host D?
A.10.1.1.1
B.10.1.10.5
C.143.45.56.1
D.143.45.56.254
Answer:C
Juniper JN0-522 JN0-522 examen JN0-522 certification JN0-522 JN0-522 examen
NO.20 Click the Exhibit button. Traffic from the Internet to the partner servers must use a VIP. In the exhibit,
what is true about the configuration of this feature?
A.You cannot use a VIP in this environment.
B.The VIP can be configured on the e0/4 interface.
C.The VIP can be configured in the Corporate or Internet zone using a different subnet than the physical
interface.
D.The VIP will work only if the destination ports in the incoming packet headers are mapped to the same
ports in the Corporate zone.
Answer:A
Juniper examen certification JN0-522 JN0-522 JN0-522 JN0-522
Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de Juniper JN0-522 très tôt. Pass4Test peut vous permettre à réussir 100% le test Juniper JN0-522, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.
没有评论:
发表评论