Le plus récent matériel de formation HP HP0-Y26

La population de la Certification HP HP0-Y26 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.

Si vous faites toujours la lutte contre le test HP HP0-Y26, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de HP HP0-Y26. Si vous avez déjà décidé à s'améliorer via HP HP0-Y26, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.

Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A HP HP0-Y26 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat HP HP0-Y26 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test HP HP0-Y26.

Code d'Examen: HP0-Y26
Nom d'Examen: HP (Building a Complete HP ProCurve Mobility Solution)
Questions et réponses: 73 Q&As

Si vous êtes intéressé par l'outil formation HP HP0-Y26 étudié par Pass4Test, vous pouvez télécharger tout d'abord le démo. Le service de la mise à jour gratuite pendant un an est aussi offert pour vous.

HP0-Y26 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y26.html

NO.1 You must configure an Hp ProCurve switch 8212zl to be the Owner of a VRID associated with VLAN 10.
What must e true of the virtual IP address for the VRID?
A. It must be an address on a muti-ntted interface
B. It must match the router s address for the VLAN 10 interface
C. It must match the address assigned to VLAN 10 on the Backup router.
D. It must use a classful network mask
Answer: B

certification HP   HP0-Y26   HP0-Y26   HP0-Y26   HP0-Y26 examen   HP0-Y26

NO.2 On an HP ProCurve switch 8212zl, which feature must be enabled before you can enable VRRP?
A. IP routing
B. a dynamic routing protocol
C. MSTP
D. IP muticast
Answer: A

HP   HP0-Y26 examen   HP0-Y26   HP0-Y26 examen

NO.3 You must use the web management interface of an HP MSM710 Controller to perform a manual
upgrade of the controller s software. In the management interface . which location must be specified as
the source for the software file?
A. TFTP server
B. your workstation
C. controller auxilary port
D. your FTP server
Answer: B

HP examen   HP0-Y26   HP0-Y26 examen

NO.4 what is the effect of the following command , entered at the CLI of an Hp ProCurve Switches 5412zl?
5412zl(ospf)#redistribute rip
A. The router will assume the role of ASBR
B. The router will become eligible for election as DR
C. The router will assume the role of ABR
D. The router will summarize RIP routes in OSPF LSAs
Answer: A

HP   certification HP0-Y26   HP0-Y26   HP0-Y26   HP0-Y26   HP0-Y26

NO.5 You have enable Dynamic ARP Protection on an HP ProCurve 5406zl switch.When is it necessary to
define IP-to MAC address bindings?
A. when you must lock down the switch s IP addresses to its base MAC address
B. when you must specify clients connected to untrusted ports
C. when you must identify devices that do not use DHCP,but have a static IP address assigned.
D. when you must protect uplink ports that connect to other swithes that do not support Dynamic ARP
Protection.
E. when you must provide sevurity to ports where different clients may connect at different times
Answer: C

HP examen   certification HP0-Y26   HP0-Y26 examen   HP0-Y26 examen   HP0-Y26   HP0-Y26

NO.6 Click the Exhibit button
What is the role of the HP ProCurve Switch 3500yl in the OSPF routing domain?
A. ABR in areas 5 and 0
B. ASBR in areas 5 and 0
C. internal router in area 5
D. internal router in area 0
Answer: A

HP examen   HP0-Y26   HP0-Y26   HP0-Y26 examen   HP0-Y26 examen

NO.7 You must configure an HP ProCurve Switch 8212zl to be the Backup router for a VRID associated with
VLAN 10. What must be true of the virtual IP address for the VRID on this router?
A. It must be an address assigned to a muti-netted interface
B. It must be an address that is not assigned to any interface on either router.
C. It must match the Backup router s address for the VLAN 10 interface.
D. It must match the Owner router s address for the VLAN 10 interface
Answer: D

HP examen   certification HP0-Y26   HP0-Y26   certification HP0-Y26   certification HP0-Y26   HP0-Y26

NO.8 You must design an MSTP solution for a customer network that uses HP ProCurve 5412zl switches in
the core and 3500yl switches at the edge. All switches will belong to single MST region. How can you
determine how may MST instances will be required to ensure that all links are in a forwarding state for at
least one VLAN?
A. Determine how many switches have identical VLAN configurations
B. Count the nubmer of redundant paths between the core and one edge switch.
C. Count the switches at the network edge
D. Determine the total number of VLANs configured on the switches.
Answer: B

HP   HP0-Y26 examen   HP0-Y26

NO.9 A customer requires high levels of redundancy and availability for a critical business network that uses
two HP ProCurve 8212zl switches in the core. What is a potential advantage of deploying the VRRP on
thest switches?
A. It will enable the switches to learn redudant paths to remote networks
B. It will enable the switches to provide redundant default gateways to clicents.
C. It will enable the configuration of redundant gateways on VRRP-aware clients
D. It will enable the switches to provide redundant links to the distribution layer.
Answer: B

HP   HP0-Y26   HP0-Y26 examen   HP0-Y26

NO.10 You have verified that an HP ProCurve Switch 3500yl is correctly configured for PIM dense mode. The
witch s IGMP table shows active hosts that are memebers of multicast group 239.193.22.22. The muticast
is in progress, and all hosts are reciving the content ,However, the muticast group does not appear in the
witch s PIM route table.
What does this indicate about the 239.193.22.22 muticast group?
A. The switch is forwarding the muticast at Layer2.
B. Other muticast routers are configured for PIM sparse.
C. The server and IGMP hosts are in different VLANs.
D. The switch is Querier for the group.
Answer: A

HP examen   certification HP0-Y26   HP0-Y26 examen   HP0-Y26

Vous pouvez télécharger tout d'abord une partie de Q&A Certification HP HP0-Y26 pour tester si Pass4Test est vraiment professionnel. Nous pouvons vous aider à réussir 100% le test HP HP0-Y26. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.