Beaucoup de travailleurs espèrent obtenir quelques Certificat IT pour avoir une plus grande space de s'améliorer. Certains certificats peut vous aider à réaliser ce rêve. Le test Extreme Networks EW0-100 est un certificat comme ça. Mais il est difficile à réussir. Il y a plusieurs façons pour se préparer, vous pouvez dépenser plein de temps et d'effort, ou vous pouvez choisir une bonne formation en Internet. Pass4Test est un bon fournisseur de l'outil formation de vous aider à atteindre votre but. Selons vos connaissances à propos de Pass4Test, vous allez faire un bon choix de votre formation.
Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A Extreme Networks EW0-100 comme votre guide d'étude.
L'équipe de Pass4Test autorisée offre sans arrêt les bonnes resources aux candidats de test Certification Extreme Networks EW0-100. Les documentations particulièrement visée au test Extreme Networks EW0-100 aide beaucoup de candidats. La Q&A de la version plus nouvelle est lancée maintenant. Vous pouvez télécharger le démo gratuit en Internet. Généralement, vous pouvez réussir le test 100% avec l'aide de Pass4Test, c'est un fait preuvé par les professionnels réputés IT. Ajoutez le produit au panier, vous êtes l'ensuite à réussir le test Extreme Networks EW0-100.
Code d'Examen: EW0-100
Nom d'Examen: Extreme Networks (Extreme Networks Associate (ENA) )
Questions et réponses: 241 Q&As
Le test de Certification Extreme Networks EW0-100 devient de plus en plus chaud dans l'Industrie IT. En fait, ce test demande beaucoup de travaux pour passer. Généralement, les gens doivent travailler très dur pour réussir.
EW0-100 Démo gratuit à télécharger: http://www.pass4test.fr/EW0-100.html
NO.1 What is the minimum ExtremeWare software version that supports the Summit48i?
A. ExtremeWare 4.x
B. ExtremeWare 5.x
C. ExtremeWare 6.x
D. None of the above
Answer: C
certification Extreme Networks EW0-100 EW0-100 EW0-100 examen
NO.2 Internal routers within an OSPF area are either DRs, BDRs, or __________.
Answer: ODR
certification Extreme Networks EW0-100 EW0-100 EW0-100
NO.3 Which of the following is not advertised in an OSPF Link State Advertisement?
A. Costs
B. Link utilization
C. Router interfaces
D. Neighbor information
Answer: B
certification Extreme Networks EW0-100 certification EW0-100 certification EW0-100 certification EW0-100
NO.4 Unlike VRRP, the Extreme Standby Router Protocol provides redundancy at both
the data link and network layers.
A. True
B. False
Answer: A
certification Extreme Networks EW0-100 EW0-100
NO.5 __________ allow(s) multiple VLANs to be controlled by a single ESRP instance.
A. ESRP domains
B. ESRP groups
C. ESRP host-attach
D. None of these.
Answer: A
Extreme Networks examen EW0-100 certification EW0-100
NO.6 A VLAN can be a member of up to 64 STPDs.
A. True
B. False
Answer: B
Extreme Networks certification EW0-100 EW0-100
NO.7 Which of the following routes will be used to forward a frame to 192.168.1.174?
A. 192.168.1.0/29
B. 192.168.1.128/30
C. 192.168.1.128/25
D. None of these.
Answer: C
Extreme Networks EW0-100 certification EW0-100
NO.8 Given router interfaces 10.0.0.1/24, 10.10.10.10/24, 192.168.0.1/24, and
192.168.255.254/24 on a Summit7i switch what will be the OSPF router ID given the
following command: config ospf routerid automatic?
A. 10.0.0.1/24
B. 10.10.10.10/24
C. 192.168.0.1/24
D. 192.168.255.254/24
Answer: D
Extreme Networks EW0-100 EW0-100
NO.9 STPDs s0, s1, and s2 have been created. How would you activate only s1 while
leaving the other STPDs inactive?
A. enable stpd s1
B. enable s1 stpd
C. enable stp ¨¤ enable s1 stpd
D. None of these
Answer: A
Extreme Networks EW0-100 certification EW0-100 EW0-100 EW0-100 examen
NO.10 Which command would you use to configure VLAN CORPORATE (tag 100) with
ports 1:1 through 4:8 tagged and ports 5:1 through 8:8 as untagged?
A. config vlan corporate ports add 1:1-4:8 tagged ¨¤ config vlan corporate ports add
5:1-8:8 untagged
B. config vlan corporate add ports1:1-4:8 tagged ¨¤ config vlan corporate add ports
5:1-8:8 untagged
C. config corporate vlan add ports 1:1-4-8 tagged ¨¤ config corporate vlan add ports
5:1-8:8 untagged
D. config corporate vlan ports add 1:1-4:8 tagged ¨¤ config corporate vlan ports add
5:1:8:8 untagged
Answer: B
Extreme Networks examen EW0-100 EW0-100 certification EW0-100
NO.11 Name a relative route priority that cannot be altered? __________.
Answer: direct
Extreme Networks examen certification EW0-100 certification EW0-100 EW0-100
NO.12 How do you disable Split Horizon?
A. disable rip splithorizon noadvertise
B. unconfig rip splithorizon
C. disable rip splithorizon
D. unconfig rip splithorizon noadvertise
Answer: C
Extreme Networks EW0-100 EW0-100 EW0-100
NO.13 Which command would you use to configure VLAN corporate with IP address
192.168.0.1/16?
A. config vlan corporate ipaddress 192.168.0.1/16
B. config ipaddress corporate vlan 192.168.0.1/16
C. config ipaddress 192.168.0.1/16 vlan corporate
D. config ipaddress 192.168.0.1/16 corporate vlan
Answer: A
certification Extreme Networks EW0-100 EW0-100 examen
NO.14 Extreme Networks "I" series switches have this many queues per port. __________.
Answer: 8
NO.15 How would you change the password for John Doe's management account?
A. Enter config jdoe and then enter the new password twice.
B. Enter config jdoe user account and then enter the new password twice.
C. Enter config user account jdoe and then enter the new password twice.
D. Enter config account jdoe and then enter the new password twice.
Answer: D
Extreme Networks examen EW0-100 EW0-100 certification EW0-100 EW0-100
NO.16 All OSPF routers in the same area must have the same LSDB.
A. True
B. False
Answer: A
certification Extreme Networks certification EW0-100 EW0-100
NO.17 In RIP, poison reverse means that:
A. A route is not advertised to the interface from which it was learned.
B. A route is advertised as unreachable to the interface from which it was learned.
C. Traffic whose source interface does not match the routing table is blackholed.
D. None of these.
Answer: B
Extreme Networks certification EW0-100 certification EW0-100
NO.18 QoS policy is applied _____ in an Extreme switch.
A. per port
B. per queue, per port
C. per queue
D. None of these.
Answer: B
Extreme Networks EW0-100 EW0-100 examen EW0-100 EW0-100
NO.19 If a packet to be forwarded does not match existing flow information in the ASIC
route cache, the packet is queued to the __________ for route processing.
Answer: cpu
Extreme Networks EW0-100 EW0-100 certification EW0-100 EW0-100
NO.20 What type of area is used to limit external routes?
A. Stub area
B. Normal area
C. Backbone area
D. None of these
Answer: A
Extreme Networks certification EW0-100 EW0-100 EW0-100 examen
NO.21 SNMP access to ExtremeWare can be limited by the following methods:
A. Use an access list
B. Use an access profile
C. Use the disable snmp access command
D. None of these
Answer: ABC
certification Extreme Networks EW0-100 certification EW0-100 EW0-100 EW0-100 examen certification EW0-100
NO.22 Which ExtremeWare feature permits ESRP to increase the number of protected
VLANs by placing them under the control of a master VLAN?
A. ESRP groups
B. ESRP domains
C. ESRP host attach
D. None of these.
Answer: B
Extreme Networks EW0-100 EW0-100 examen EW0-100
NO.23 What is the default value for the RIP garbagetime setting?
A. 30 seconds
B. 60 seconds
C. 120 seconds
D. 180 seconds
Answer: C
certification Extreme Networks EW0-100 examen EW0-100 examen EW0-100
NO.24 VLAN aggregation allows multiple sub-VLANs to share a single IP subnet.
A. True
B. False
Answer: A
Extreme Networks examen EW0-100 EW0-100
NO.25 Exhibit:
Given this display, how would you find information similar to the SHOW SWITCH
command?
A. Click on STATISTICS, then SHOW, then SWITCH.
B. Click on STATISTICS, then SWITCH, then SHOW.
C. Click on STATISTICS, then SHOW.
D. Click on STATISTICS, then SWITCH.
Answer: D
Extreme Networks EW0-100 EW0-100 certification EW0-100 EW0-100
NO.26 RIP version 2 uses a composite metric that includes link speed and delay.
A. True
B. False
Answer: B
Extreme Networks examen EW0-100 certification EW0-100 EW0-100 examen
NO.27 Which RIP settings are enabled by default?
A. Triggered updates
B. Poison Reverse
C. Split Horizon
D. Route redistribution
Answer: ABC
Extreme Networks EW0-100 certification EW0-100 EW0-100 EW0-100
NO.28 When using Spanning Tree Protocol, ExtremeWare permits VLANs in different
STPDs to share the same port when tagged.
A. True
B. False
Answer: B
Extreme Networks examen EW0-100 EW0-100 EW0-100 EW0-100
NO.29 What is the default STP forward delay value?
A. 2 seconds
B. 10 seconds
C. 15 seconds
D. 20 seconds
Answer: C
Extreme Networks EW0-100 EW0-100 examen EW0-100
NO.30 Without QoS, all packets are allowed equal access to an egress port.
A. True
B. False
Answer: A
Extreme Networks EW0-100 EW0-100
Pass4Test est un site web de vous offrir particulièrement les infos plus chaudes à propos de test Certification Extreme Networks EW0-100. Pour vous assurer à nous choisir, vous pouvez télécharger les Q&As partielles gratuites. Pass4Test vous promet un succès 100% du test Extreme Networks EW0-100.
没有评论:
发表评论